Introduction about the props:
Turn three knobs to a location,Props will be triggered, 12VEM lock will be opened.
The owner can modify the password.
HOW TO SET or MODIFY THE PASSWORD?
Before powering the props ,the owner turn the 3 knobs to the position you like,
and then press on the red button in the controller don’t release until power the controller,
Password configuration is complete.If the player turn the 3 knobs to right position the owner preset,the EM lock will be opened.
HOW TO RESET FOR NEXT PLAYER?
Later someone triggering props succesfully,EM lock has been opened,
the owner only need to turn 3 konbs to other position,the EM lock will be locked again.
1X12V US adapter
HOW TO CONNECT LINES?
1.The controller powered by 12V adapter.
2.The black and red lines from controller connected to 12V EM lock(Positive and negative correspondence).
- It is finished props and eazy to use,so don’t worry anything even though you don’t have enough knowledge about it.
- The props sets including 1pc contoller box,3pcs knobs,lines,1pc US adapter.
- Black and red lines connected to 12V EM Lock (not included),length 29inches,the line between controller and knobs length 63 inches.
- Support DIY,tell us your special ask,we will provide solution for you.